COSA Xentaur COSA 707 - Manual (Page 18)

COSA Instruments USER MANUAL COSA 707
www.cosaxentaur.com 18
9 FIRST USE OF THE INSTRUMENT
After the analyzer has been inspected and is ready for start up it can be switched on and personal-
ized settings can be entered. These settings can be changed at any time.
9.1 Analyzer ready for operation
•
Unpack the analyzer, read the complete manual
•
The analyzer was shipped completely assembled, in working condition and ready for opera-
tion. It is recommended that the analyzer is thoroughly inspected for completeness and
damage.
•
Recommendation: charge the batteries for 8 hours prior to use.
•
Check/Change date and time
9.2 Analyzer settings
The “Settings” menu allows to configure some instrument specific paramteres.
In the main menu “EXTRAS“ = “F3 key” - scroll down to “Settings“ then press the “OK“ key, By se-
lecting a line the parameter value can be changed by the arrow keys.
OK
LCD brightness 5 – 100 % Display-brightness, depending on temperature and also
on the personal judgement of the user, at 20°C a value of
ca. 50% is normal
Language DE/GB/FR/ITCZ/RO/TR/ES/ Select device languages
Country DE/USA/GB/IT/AT/RO/ES/
plus others Enables some country specific parameters like fuel
types, calculated values etc.
Temperature Unit °C, °F Change the unit for temperature in all screens
Pressure Unit Pa, hPa/Pa, hPa, kPa/Pa,
kPa, mbar, mmH2O,
cmH2O, inH2O, mmHg, Change the unit for pressure in all screens. The meaning
of hPa/Pa and kPa/Pa is that the instrument performs a
dynamic change of unit depending on the absolute value