COSA Xentaur COSA 707 - Manual (Page 26)

COSA Instruments USER MANUAL COSA 707
www.cosaxentaur.com 26
9.4.4 Configuration of the measurement window (display content)
Start the measuring program – once you are inside the measuring window press the key.
Now you select “define measuring window” and press the OK key. The top value will now be
marked black – this black bar can be moved up and down. Move it to the postion that you would
like to change or to the position where you want to add a measuring value. Once you have reached
the position you van uses the arrow left and right keys to change the measuring value.
When all your changes have been made, you press again the menu key. Now you select “Save
measuring window”. All your changes will be saved and all saved values will be printed when using
the printer function.
Start the measuring program – once you are inside the measuring window press the menu key.
9.4.5 Configuration of the zoom function
For each measurement program you have 3 zoom windows with two selectable values for each
window.
,
, ,
Menu-key
, ,
Change Zoom window 1..3
Change measuring values
F1
,
Save measuring window and save configuration
9.4.6 Change measurement program names
In the “Fuel type selection” window you can edit the marked program name with the F3 key and
then change the program name.