DeFelsko PosiTector SPG v.1.1 Full Manual - Manual (Page 17)

14
Delete
Removes a batch or sub-batch completely from memory. The
name is deleted and all measurements are erased. Sub-batches
can be deleted individually. To delete all related sub-batches,
simply delete the top-level batch.
View
Scroll using the Up or Down buttons through information,
statistical summary, and a list of each reading in the currently
opened batch. Press to exit.
Open
Selects a previously created batch or sub-batch name to open and
make current. If it contains measurements, on-screen statistics will
immediately reflect values calculated from this batch. The
calibration setting (i.e. Cal 2) associated with this batch is also
opened.
A solid triangle is displayed to the right of the batch
name when sub-batches are present. Press to view sub-
batches. This also applies to the Delete, View and Print options.
NOTE:
Close
Stops the recording process, closes the current batch, and
removes batch information from the display.
Therefore most organizations and contract specifications require
multiple measurements be taken and analyzed to produce a final
result that better characterizes the surface.
The Smart Batch menu option sets-up the PosiTector SPG to
comply with the statistical approaches defined in various standards
and test methods published by organizations such as ASTM,
SSPC, ISO, IMO, US Navy, SANS and AS.
For instructions on how to use the Smart Batch™ feature, see
www.defelsko.com/smartbatch