Delmhorst Instrument Navigator Pro - Manual (Page 5)

5
TEMP. MODE
–
The G-7 defaults to a temperature of 80°F. As grain temperature increases, indicated moisture
content rises. Lower grain temperatures result in lower indicated moisture content.
The temperature modes are:
AUTOMATIC: A built-in temperature sensor measures the temperature of the grain sample.
Let the grain sample remain in the sample cup for at least 5 minutes prior to taking a
reading to allow the meter to correctly read the grain temperature. The meter will then
display a temperature-corrected reading.
MANUAL: Allows you to manually input the grain temperature as taken with an external
thermometer or temperature system. After the temperature is input, the meter will display a
temperature-corrected reading.
Do not use the manual temperature mode unless you are confident that the
temperature of the grain and the temperature of the meter are essentially the same.
To change the temperature mode:
 Press the UP key until the display reads Temp Mode?
 Press the ENTER key to select a temperature mode. The meter will display the current
temperature mode.
 To choose the temperature mode, press UP or DOWN keys to toggle, then ENTER to set.
TEMP. SCALE
 Press the UP key until the display reads Temp Scale?
 Press the ENTER key to select the temperature scale (Fahrenheit or Celsius).
 Use the UP/DOWN keys to scroll forward or backward to the temperature scale desired.
 When scrolling in either direction, press ENTER to set the desired temperature scale.
%MC OFFSET
The %MC offset allows you to make a correction to the calibration of the meter in order to match
the readings of the commercial grain elevator. The offset may be changed in increments of
0.1%.