Delmhorst Instrument Navigator Pro - Manual (Page 8)

8
volts. This is an indication that the remaining battery life is 1- 1/2 hrs of continuous “on” time.
SELECT THE GRAIN

To change the scale, press the UP/DOWN key until the display reads “Select grain?

Press ENTER to view the available grains. The meter will display “Change Grain to:

Using the UP/DOWN keys to view the list of grains.

Press Enter to select the desired grain.
Note: if you do not press the ENTER key after having reached your desired setting for
any of the above selections, the meter will remain at the previous value prior to scrolling
in either direction.
STORAGE MENU
The storage menu of the G-7 allows you to view any stored readings and display various
statistics about those readings. It also allows you to clear the memory.
TO ACCESS THE STORAGE MENU:
 Press the UP/DOWN keys until the display reads Storage Menu?
 Press ENTER
The following functions are accessed in this order by pressing the UP key. These instructions
assume that you have already accessed the Storage Menu as described above:
VIEW READINGS
After entering the
storage menu, the display will immediately read “View Readings?”
 Press the ENTER key
. The display will read “Select Batch:” and will list the name of one of
the grains which has stored data.
Note: If you have stored readings in “batches” for a number of different grains, you may
select the grain to view by pressing the UP/DOWN keys until the desired grain is displayed.
Then Press ENTER to select that grain. The meter will display the first reading of the
selected batch.
 Press the UP key to scroll to the next stored readings.