Delmhorst Instrument RDM-3 - Manual (Page 11)

Copyright  2005, Delmhorst Instrument Co.
Page 11 of 28
UP and DOWN keys can be used to select one of three available options. If
COMP TEMP is selected, use the LEFT and RIGHT keys to respectively
decrease or increase the compensation temperature value.
NOTE: The compensation temperature increments and decrements in steps of 5
deg F and 3 (or 2) deg C.
Choose “DONE” to update the meter with the newly chosen temperature value,
or “CANCEL” to ignore changes and return to the original compensation
temperature setting. The meter will automatically apply the new temperature
correction to further MC readings.
CREATE/EDIT A JOB:
This menu option selects the job edit function:
This screen always begins by displaying the current job.
NOTE: If “DONE” is selected with the current job on the screen, there can be two
outcomes:
o The current job is empty; the meter will proceed to the “Create Job” screen.
This is done to give the user the opportunity to modify the settings for the
current job (this is possible because no readings have been stored yet).
o The current job is not empty; the meter will immediately return to the MC
READ Mode menu. This is the same as selecting “CANCEL”.