Delmhorst Instrument RDM-3 - Manual (Page 18)

Copyright  2005, Delmhorst Instrument Co.
Page 18 of 28
A selected job containing readings offers two other selectable options:
“VIEW SET” and “DONE”.
o VIEW SET: This option allows the user to view a specific range of
readings in a particular job, as opposed to the entire set, by providing a
configurable start point. It becomes useful when large numbers of
readings are present in the meter. View Set always begins by displaying
“1 TO XXX”, where XXX is the maximum number of readings in the
selected job. If left unchanged, the first reading to be reviewed will be
number 1. Readings may only be reviewed in ascending sequential order.
Using the Left or Right buttons, the left-side value can be changed in
increments of 10. For example, assume the selected job contains 23
readings. The View Set entry will begin by displaying “1 TO 23”.
Successive Right button presses will yield the following: “11 TO 23” and
“21 TO 23”. At this point, the value on the left side is within 10 readings of
the value on the right side. Alternately, pressing the Left button causes the
meter to subtract 10 from the current left-side value.
o DONE: Selecting this option signals to the meter that the user has
completed the reading recall setup process and is ready to begin
reviewing readings.
NOTE: There may be a significant delay while the meter processes the required
set of readings for review, depending on the number of jobs present in the meter,
percentage of memory space occupied by readings, current job size and
fragmentation. The meter will display a screen with the word “PROCESSING…”.
User input is ignored during this time. Control is returned to the user once the
algorithm is complete and the Retrieved Readings screen is displayed, as shown
in the example below:
o Cancel : This feature returns the meter to the Storage Menu