Fire-Lite ECC-50/100E Emergency Command Center - Manual (Page 13)

Emergency Command Center Manual —
P/N LS10001-000FL-E:A 4/10/2013 13
Input/Output Circuit Specifications
Product Description
– two Style Y (Class B) or Style Z (Class A) speaker circuits (with optional ECC-50W-
25/70V Audio Amplifier installed)
– eight Style Y (Class B) or Style Z (Class A) speaker circuits (with optional ECC-50W-
25/70V and ECC-CE6 installed)
• ECC-50/100 can be controlled by an FACP via the ANN/ACS (EIA-485) link. Compatible
FACPs include the MS-9600(UD)LS and MS-9200UDLS.
• Integral supervised microphone
• Microphone time-out feature which reverts back to prerecorded message if emergency page
exceeds the programmed time
• Up to 14 recorded messages
• 14 prerecorded messages for fire, emergency, and weather alerts
• Field-selectable message and custom message recording capability using the local
microphone, a USB port, or an external audio input
• External Audio Input can be used for background music
• Up to 60 second message duration for all messages
• Integral tone generators field selectable for multiple tone types
• Powered by integral AC power supply or batteries during AC fail
• Programmable delay of immediate, 2 hours or 6 hours reporting of AC Loss
• Piezo sounder for local trouble
• 100 event history log
• Three Form-C relays:
– AC Power Loss Relay - TB1
– System Trouble Relay - TB2
– MNS Active - TB3
• 500 mA (0.5A) Special Application (auxiliary power) output for addressable modules when
interfaced with compatible addressable FACPs and End-of-Line power supervision relays
• System Status LEDs (refer to “Controls and Indicators” on page 20)
• Integral Dress Panel
• Optional TR-CE semi-flush trim ring
• Any combination of up to eight (8) of:
– Optional ECC-RM Remote Microphone (includes cabinet).
– Optional ECC-RPU Remote Page Unit (includes cabinet)
– Optional ECC-LOC (includes cabinet)
• Optional ECC-CE6 Circuit Expander
• Optional ECC-50W-25V amplifier, 50 watts, 25 volts
• Optional ECC-50W-70V amplifier, 50 watts, 70 volts
• Optional ECC-50DA distributed amplifier, 50 watts
• Optional ECC-125DA distributed amplifier, 125 watts
1.2 Input/Output Circuit Specifications
1.2.1 ECC-50/100 Main Control Board
AC Power - TB15
ECC-50/100: 120 VAC, 60 Hz, 3.5 amps (HOT, NEU)
ECC-50/100E: 240 VAC, 50 Hz, 2.0 amps (HOT=HotLeg1, NEU=HotLeg2)
Wire size: minimum #14 AWG (2.00mm 2 ) with 600 V insulation.