2 dead front removal, 2 dead front removal -3 – Fire-Lite MS-25E Addressable Fire Control Panel User Manual
Page 33
Advertising
![background image](/manuals/367224/33/background.png)
Control Panel Installation
53688
4-3
4.1.3.2 Dead Front Removal
Follow these steps to properly remove the dead front panel from the control panel cabinet.
1. Remove the two annunciator screws, do not discard them. See Figure 4-1.
2. Tilt the dead front forward to clear the top of the cabinet and left the dead front out of the
cabinet. See Figure 4-1.
3. Reinsert the two annunciator screws. See Figure 4-1.
Advertising
This manual is related to the following products: