GW Instek GDS-1000-U Series Programming Manual - Manual (Page 21)

COMMAND DETAILS
21
±5.0 –5.0V ~ +5.0V
(100mV/div~500mV/div)
±50.0 –50.0V ~ +50.0V
(1V/div ~ 5V/div)
Example :channel1:scale 1.00e–2
:channel1:offset 2.00e–2 Sets the Channel 1
scale to 10mV/div
Sets the Channel 1
offset to 20mV
:CHANnel<X>:PROBe
Set
Query
Description Sets or returns the probe attenuation factor.
Same as: Channel key → F4
Syntax < Long > < Short >
:channel<X>:probe <NR3>
:channel<X>:probe? :chan<X>:prob <NR1>
:chan<X>:prob?
Parameter <X> Channel <NR1> Probe attenuation factor
1/2 CH1/2 0 1x
1 10x
2 100x
Example :channel1:probe 1 Sets the Channel 1
probe attenuation
factor to 10x
:CHANnel<X>:SCALe
Set
Query
Description Sets or returns the vertical scale. The scale depends
on the probe attenuation factor.
Same as: Volts/Div knob
Syntax < Long > < Short >
:channel<X>:scale <NR3>
:channel<X>:scale? :chan<X>:scal <NR3>
:chan<X>:scal?