GW Instek GDS-1000-U Series Programming Manual - Manual (Page 53)

COMMAND DETAILS
53
Save/Recall Command
:MEMory<X>:RECall:SETup ........................................53
:MEMory<X>:RECall:WAVeform .................................53
:MEMory<X>:SAVe:SETup ..........................................54
:MEMory<X>:SAVe:WAVeform ...................................54
*RCL .............................................................................55
:REF<X>:DISPlay ..........................................................55
:REF<X>:LOCate ..........................................................56
:REF<X>:SAVe ..............................................................56
*SAV .............................................................................57
:MEMory<X>:RECall:SETup
Set
Description Recalls a panel setting from the internal memory.
Same as: Save/Recall key (recall) → F3
Syntax < Long > < Short >
:memory<x>:recall:setup :mem<x>:rec:set
Parameter <X> Internal memory
1 ~ 15 S1 ~ S15
Example :memory1:recall:setup Recalls the settings from
the internal memory S1
:MEMory<X>:RECall:WAVeform
Set
Description Recalls a waveform from the internal memory and
saves it to a reference waveform.
Same as: Save/Recall key (recall) → F4
Syntax < Long > < Short >
:memory<x>:recall:waveform
<NR1> :mem<x>:rec:wav
<NR1>
Parameter <X> Internal memory