GW Instek GDS-1000-U Series Programming Manual - Manual (Page 64)

GDS-1000-U Programming Manual
64
Syntax < Long > < Short >
:trigger:mode <NR1>
:trigger:mode? :trig:mod <NR1>
:trig:mod?
Parameter <NR1> Trigger mode
1 Auto
2 Normal
Note Before using this command, select the edge or
pulse trigger. See the example below.
Example :trigger:type: 0
:trigger:mode 2 Selects the edge trigger
and normal trigger
mode
:TRIGger:NREJ
Set
Query
Description Turns the noise rejection mode on/off.
Same as: Trigger key → F4 → F4
Syntax < Long > < Short >
:trigger:nrej <Boolean>
:trigger:nrej? :trig:nrej <Boolean>
:trig:nrej?
Parameter <Boolean> Noise rejection mode
0 off
1 on
Note Before using this command, select the edge or
pulse trigger. See the example below.
Example :trigger:type 0
:trigger:nrej 0 Selects the edge trigger
and turns off the noise
rejection