GW Instek GDS-1000A-U Series User Manual - Manual (Page 100)

GDS-1000A-U Series User Manual
100
7. Press Coupling repeatedly to
select the trigger coupling,
DC or AC.
Coupling
AC
Range DC, AC
8. Press Rejection to select the
frequency rejection mode.
Rejection
Off
Range LF, HF, Off
9. Press Noise Rej to turn the
noise rejection on or off.
Noise Rej
Off
Range On, Off
10. Press Previous menu to go
back to the previous menu.
Previous
Menu
Configuring the video trigger
Procedure 1. Press the Trigger menu key. MENU
2. Press Type repeatedly to
select video trigger. The
video trigger indicator
appears at the bottom of the
display.
Type
Video
3. Press Source repeatedly to
select the trigger source
channel.
Source
CH1
Range Channel 1, 2