GW Instek GDS-1000A Series User Manual - Manual (Page 108)

GDS-1000A Series User Manual
108
Saving all (panel settings, display image, waveform)
Procedure 1. (For saving to an external
SD card) Insert the card into
the slot.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recall Save/Recall
3. Press Save All. The following
information will be saved.
Setup file
(Axxxx.set)
Two types of setups are saved:
the current panel setting and
the last internally saved
settings (one of S1 ~ S15).
Display image
(Axxxx.bmp)
The current display image in
the bitmap format.
Waveform data
(Axxxx.csv)
Two types of waveform data
are saved: the currently active
channel data and the last
internally saved data (one of
W1 ~ W15).
4. Press Ink Saver repeatedly to
invert the background color
(on) or not (off) for the
display image.
5. Press Destination.
SD Normal Save to the SD card with a 4k
waveform memory length.