GW Instek GDS-1000A Series User Manual - Manual (Page 114)

GDS-1000A Series User Manual
114
3. Press Recall Waveform. The
display shows the available
source and destination
options.
4. Press Source repeatedly to
select the file source,
internal memory or external
SD card. Use the Variable
knob to change the memory
location (W1 ~ W15).
VARIABLE
Memory Internal memory, W1 ~ W15
SD card External flash drive, no
practical limitation on the
amount of files. The waveform
file must be placed in the root
directory to be recognized.
5. Press Destination. Use the
Variable knob to select the
memory location.
VARIABLE
RefA, B Internally stored reference
waveforms A, B
6. Press Recall to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Note
The file will not be recalled if the
power is turned off or the SD card is
disconnected before completion.