GW Instek GDS-1000A Series User Manual - Manual (Page 117)

PRINT
117
P
RINT
The GDS-1000A is able to print screen images
directly to a PictBridge compatible printer. The
printed images can use the “Ink Saver” feature to
print onto a white rather than a black background
to reduce the amount of ink used. Note that
printing and remote control cannot be used at the
same time.
Print (Hardcopy)
Background The Hardcopy key works as a
shortcut for printing screen
images directly to a printer or
to save display images,
waveform data, and panel
settings onto an SD card. Hardcopy
The Hardcopy key can be configured into three
types of operations: save image, save all (image,
waveform, setup) and printer.
USB connection Printer end Type A, host
GDS-1000A end Type B, slave
Speed 1.1/2.0 (full speed)
Procedure 1. Connect the USB cable to
the USB slave port on the
GDS-1000A rear panel.