HT instruments T2100 - Manual (Page 20)

T2000-T2100
EN – 19
4.7.2. MEM
Shortly pressing the multifunction key “
2”
activates the “
MEM” function, and the result on
the display is saved in the internal memory. For
a few seconds, the screen in Fig. 29 is shown,
which contains the “MEM” symbol and the
number of the location in which this datum has
been saved.
For managing data in the memory, see § 4.8.
Fig. 29
4.7.3. Anomalous situations
While measuring, the indication “ OL A” means
that the current measured exceeds the maximum
value which can be measured by the instrument
(see Fig. 30).
Fig. 30
While measuring, the symbol “ ” means that
the current measured exceeds the maximum
limit set (see For managing the alarm thresholds,
see § 4.9.).
For managing the alarm thresholds, see § 4.9.
Fig. 31