HT instruments T2100 - Manual (Page 27)

T2000-T2100
EN – 26
6.2.1. Reference guidelines
Safety: IEC/EN61010-1,
IEC/EN61010-2-032
Insulation: double insulation
Pollution level: 2
Max operating altitude: 2000m ; (6562ft)
Measurement category: CAT III 150V to earth, Max. 20A
6.2.2. General characteristics
Mechanical characteristics
Dimensions (L x W x H):
293 x 90 x 66mm ; (12 x 4 x 3in)
Weight (batteries included): 1320g ; (47 ounces)
Jaw opening / Max cable size: 32mm
Power supply
Battery type:
4 x1.5V alkaline batteries LR6 AA MN1500
Low battery indication: the display shows symbol “ ”
Inner consumption: <50mA
Auto power OFF: after 5 minutes of idleness
Display:
Characteristics: 4 LCD, decimal sign and point and backlight
Sampling rate: 1 measurement per second
Memory:
Memory capacity: 99 locations
Serial communication (T2100 only):
RS232 interface:
half-duplex, baud rate 4800
6.3. ENVIRONMENT
6.3.1. Environmental conditions for use
Reference temperature:
20°C ± 3°C ; (68°F ± 37°F)
Operating temperature: 0°C ÷ 40°C ; (32°F ÷ 104°F)
Allowable relative humidity: 10%RH ÷ 90%HR
This instrument satisfies the requirements of Low Voltage Directive 2006/95/EEC
(LVD) and of EMC Directive 2004/108/EEC
6.4. ACCESSORIES
PROVIDED
 Resistive test loop
 RS232 communication cable (T2100)
 Batteries
 Rigid transport bag
 ISO9000 calibration certificate
 User
manual