HT instruments SIRIUS89N - Manual (Page 50)

SIRIUS89N
EN - 48
LOOP 05.06.01 Message ">199.9" means
that the Resistance
measured is higher than
the maximum measurable
>199.9
Ω
---A
FRQ =50.0HZ
VP-N= 1V Vp-PE= 0V
P-N
!
FUNC Z2
Ω
In the mode P-P, P-N
mode the instrument
carries out the test and
detects a
resistance to
higher than 199.9 Ω, the
screen alongside is
displayed.
This result can be stored pressing the SAVE key twice (according to paragraph 9.1).
LOOP 05.06.01 Message ">1999" means
that the Resistance
measured is higher than
the maximum measurable
>1999
Ω
---A
FRQ =50.0HZ
VP-N= 1V Vp-PE= 0V
RA 50V
!
FUNC UL
In the mode
P-PE, R
A
mode the instrument
carries out the test and
detects a
resistance to
higher than 1999 Ω, the
screen alongside is
displayed.
This result can be stored pressing the
SAVE key twice (according to paragraph 9.1).
LOOP 05.06.01 Phase Sequence not
correct
RTS
FRQ =50.0HZ
VR-S=391V VS-T= 0V
VT-R= 0V
NOT CORRECT
!
FUNC
Message “LOW Voltage
Phase T”: means that
Phase T has a low voltage
value. Similar message for
Phase R and S.
In the mode, if the
voltage of one or more
phase is too low, one or
more phase has a low
voltage the instrument
will show a screen
similar to the along side
displayed.
This result can be stored pressing the
SAVE key twice (according to paragraph 9.1).