In-Situ Level TROLL 300/500/700/BaroTROLL Operators Manual User Manual
Page 43
1-800-446-7488
43
www.in-situ.com
Screen Element
Definition
The Logging tab displays a list of logs in an instrument. When you
click the Logging tab, it can take a moment for the software to
retrieve information from the instrument. The Logging tab is not
applicable for non-logging instruments such as the RDO PRO
Probe.
The Sensors tab lists the sensors in the connected instrument,
along with their serial numbers and the dates of factory calibration
and user calibration. Use the buttons in this tab to calibrate sensors
that support user calibration and configure sensors that support
configuration.
The Device Setup tab allows access to instrument information and
settings such as instrument name, serial number, firmware version,
communication settings, diagnostics, and factory reset options.