Jenway 6305 - Manual (Page 13)

13
1. Lamp access panel Allows access to lamp when replacement is necessary (6300 and
6320D only) Refer to section 8.2 for xenon lamp replacement (6305 only)
NOTE: The lamp access panel and all ventilation slots must NOT be covered or
obstructed at any time.
2. Power switch On/off switch for the unit
3. Power in socket IEC type connection socket for mains cable
4. Output sockets Analogue output
5. RS232 serial port Connection to a PC
2.6 SAMPLING
Model 6305 is supplied with a 10mm cuvette holder. Other accessories can be fitted (refer to
section 7).