KEPCO BHK-MG 40W (Half Rack) Series - Manual (Page 101)

BHK-1/2-MG 121313
3-57
6. To disable power to the load:
a. If load switch used, open the switch.
b. If load switch not used, press POWER ON/OFF key: once on the master unit, then
once on the slave unit.
c. Alternative: Turn both units off by setting POWER switch to off (down) position, first on
master unit, then on slave unit.
FIGURE 3-21. SERIES MASTER-SLAVE (VOLTAGE MODE) CONFIGURATION