KEPCO EL Series Electronic Load Operator Manual P/N 243-1295 Firmware Version 3.87 to 3.xx - Manual (Page 78)

B-16
SERIES EL 022013
B.85 SYSTem:COMMunicate:ECHO? QUERY
SYST:COMM:ECHO?
Syntax: Short Form: SYST:COMM:ECHO? Long Form: SYSTem:COMMunicate:ECHO?
Returns: 1 if echo is on, 0 if echo is off
Description: Indicates whether echo is on or off.
B.86 SYSTem:COMMunicate:LAN:IPADdress COMMAND
SYST:COMM:LAN:IPAD
Syntax: Short Form: SYST:COMM:LAN:IPAD <a.b.c.d>
Long Form: SYSTem:COMMunicate:LAN:IPADdress <a.b.c.d>
Where: <a, b, c, d> = numbers from 0 to 255 comprising the IP Address
Description: Sets the IP address to be used during LAN communication.
B.87 SYSTem:COMMunicate:LAN:IPADdress? QUERY
SYST:COMM:LAN:IPAD?
Syntax: Short Form: SYST:COMM:LAN:IPAD?
Long Form: SYSTem:COMMunicate:LAN:IPADdress?
Returns: <a.b.c.d> = numbers from 0 to 255 comprising the IP Address
Description: Returns the IP Address used during LAN communication.
B.88 SYSTem:COMMunicate:LAN:MAC? QUERY
SYST:COMM:LAN:MAC?
Syntax: Short Form: SYST:COMM:LAN:MAC?
Long Form: SYSTem:COMMunicate:LAN:MAC?
Returns: <nn> = hex MAC Address
Description: Returns the hex MAC address of the unit if the ethernet (E suffix) option is installed; otherwise
returns 00
H
.
B.89 SYSTem:COMMunicate:LAN:MODE COMMAND
SYST:COMM:LAN:MODE
Syntax: Short Form: SYST:COMM:LAN:MODE [FIX | DCHP]
Long Form: SYSTem:COMMunicate:LAN:MODE [FIXed | DCHP]
Description: Determines method used to obtain IP address for LAN communication.
SYST:COMM:LAN:MODE:FIX (default) configures the LAN port to use a static (fixed) IP address
entered from the front panel. SYST:COMM:LAN:MODE DCHP configures the LAN port for the stan-
dard DCHP hub required interface; uses IP address in the 192.168.x.x range compatible with most
default hub configurations.
B.90 SYSTem:COMMunicate:LAN:MODE? QUERY
SYST:COMM:LAN:MODE?
Syntax: Short Form: SYST:COMM:LAN:MODE?
Long Form: SYSTem:COMMunicate:LAN:MODE?
Returns: [FIXed | DCHP|
Description: Returns IP Mode (method of finding the IP Address used during LAN communication); see
PAR. B.89.
B.91 SYSTem:COMMunicate:LAN:SUBNetmask COMMAND
SYST:COMM:LAN:SUBN
Syntax: Short Form: SYST:COMM:LAN:SUBN <a.b.c.d>
Long Form: SYSTem:COMMunicate:LAN:SUBNetmask <a.b.c.d>
Where: <a, b, c, d> = numbers from 0 to 255 comprising the Subnet Mask
Description: Sets the Subnet Mask to be used during LAN communication.