KROHNE IFC 300 Converter Quickstart EN - Manual (Page 26)

3
ELECTRICAL CONNECTIONS
26
IFC 300
www.krohne.com 08/2010 - 4000070303 - QS IFC 300 R06 en
In the wall-mounted housing version the connection terminals are designed for the
following cable cross-sections:
• Flexible cable ≤ 1.5 mm
2
/ AWG 14
• Solid cable ≤ 2.5 mm
2
/ AWG 12
1 Strip the conductor to dimension a.
2 Remove any shield that is present.
3 Pull a shrinkable tube over the prepared cable.
4 Crimp the wire end ferrules onto the conductors 7, 8 and 9.
Figure 3-9: Field current cable C, preparation for the signal converter
a = 80 mm / 3.15"