KROHNE OPTIFLUX 6000 Quickstart EN - Manual (Page 7)

INSTALLATION
2
7
OPTIFLUX 6000
www.krohne.com 07/2013 - 4002945701 - QS OPTIFLUX 6000 R05 en
2.6 Pre-installation requirements
Make sure that you have all necessary tools available:
• Allen key (4 mm)
• Small screwdriver
• Wrench for cable glands
• Wrench for wall mounting bracket (remote version only)
• Torque wrench for installing flowmeter in pipeline
2.7 General requirements
2.7.1 Vibration
2.7.2 Magnetic field
INFORMATION!
The following precautions must be taken to ensure reliable installation.
• Make sure that there is adequate space to the sides.
• Protect the signal converter from direct sunlight and install a sun shade if necessary.
• Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
• Do not expose the signal converter to intense vibration. The flowmeters are tested for a
vibration level in accordance with IEC 68-2-64.
Figure 2-4: Avoid vibrations
Figure 2-5: Avoid magnetic fields