KROHNE USB ADAPTER PLUS EMF EN - Manual (Page 5)

OPERATION
2
5
USB ADAPTER PLUS
www.krohne.com 06/2014 - 4003748601 - QS USB_Adapter_Plus R03 en
2.2 IFC 300
The standard delivery includes all items you need to use it with an IFC 300 signal converter.
Needed software:
• GDC driver
• IFC 300 HART DTM
• Pactware configuration tool
with GDC connection cable
Figure 2-2: Connection of adapter to the GDC bus of the IFC 300.
1 Connection room of IFC 300
2 Cable 2x3-pole > 2x4-pole
3 USB-Adapter Plus
with IR interface cable
Figure 2-3: Connection of adapter to the IR interface of the IFC 300.
1 Display of IFC 300
2 IR Interface cable
3 USB-Adapter Plus
INFORMATION!
All relevant tools are on the CD and on the website of the manufacturer. Connect the USB
connector to your PC, start the relevant program and follow the instructions given on the display.
Refer to the documentation of the signal converter for a description of the menu.