Audiovox AMP-592C - Manual (Page 3)

128-5721 128-5721 128-5721 128-5721 128-5721
SHT. 3 OF 12 SHT. 3 OF 12 SHT. 3 OF 12 SHT. 3 OF 12 SHT. 3 OF 12
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER
This power amplifier has been designed to provide high quality performance with
a minimum of maintenance. However, it's performance will only be as good as the
care and quality of components with which it is installed. We therefore advise that
you read these instructions very carefully to familiarize yourself with the product
and it's features.
Should you require assistance with the installation or wiring of this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.
Monday - Friday
Saturday 8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
1-800-645-4994 1-800-645-4994 1-800-645-4994 1-800-645-4994 1-800-645-4994
HELP!
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
Maximum Output Power:
Output Power @ 0.1% T.H.D.:
Output Impedance:
Frequency Response:
Channel Separation:
Signal / Noise Ratio:
Input Impedance:
100 watts x 2 @ 4 ohms
60 watts RMS x 2
2 - 8 ohms
10 - 50,000 Hz. ± 1 dB
50 dB
90 dB (A-Weighted)
low-level 10K ohms
high-level 100 ohms
Input Sensitivity:
Filter Type:
Filter Slope:
Filter Crossover:
Supply Voltage:
Fuse Rating:
Dimensions (W x H x D):
low-level 200 mv. - 2 v.
high-level 2 - 10 v.
low-pass
12 dB/octave
50 - 250 Hz. (selectable)
12 volts, negative ground
10 amps.
12-1/4" x 2" x 6-1/8"
311 mm x 50 mm x 155 mm
-1-