Audiovox AMP-592C User Manual

Page 5

Advertising

INSTALLATION INSTRUCTIONS

INSTALLATION DIAGRAM

1. Select a mounting area where the amplifier will

have sufficient air circulation for proper cooling.
Inadequate air circulation will cause the temperature
of the amplifier to rise and will trigger the

thermal protection mode.

2. Place the amplifier on the mounting surface

and mark the locations of the four mounting
holes as shown in the illustration.

3. Remove the amplifier and drill a 1/8" hole at

each of the four locations.

CAUTION:

CAUTION: Before drilling the holes, look at the

underside of the mounting surface. Always
check carefully to avoid drilling into wiring,
braces, fuel or brake lines. CHECK BEFORE

CHECK BEFORE

YOU DRILL !

4. Secure the amplifier to the mounting surface

using the self-tapping screws provided.

128-5721

SHT. 5 OF 12

-3-

MOUNTING SURFACE

1/8" DIA. HOLE

SELF-TAPPING SCREW

Advertising

Popular Brands

Popular manuals