KROHNE MFC 300 FOUNDATION FIELDBUS EN - Manual (Page 38)

4
OPERATION
38
MFC 300
www.krohne.com 02/2013 - 4001086702 - AD MFC 300 FF R02 en
CLOCK_PER CLOCK_PER CLOCK_PER CLOCK_PER
Clock Period Clock Period Clock Period Clock Period
R/W Establishes the period for periodic reset, in seconds. 0
Setting:
Positive or 0
GOOD_LIM GOOD_LIM GOOD_LIM GOOD_LIM
Good Limit Good Limit Good Limit Good Limit
R/W Sets the limit for PCT_INCL. Below this limit OUT receives the
status good.
0
Setting:
0...100%
GRANT_DENY GRANT_DENY GRANT_DENY GRANT_DENY
Grant Deny Grant Deny Grant Deny Grant Deny
R/W Options for controlling access of host computers and local
control panels to operating, tuning and alarm parameters of
the block.
-
Grant R/W Depending on the philosophy of the plant, the operator or a
higher level device (HLD), or a local operator's panel (LOP) in
the case of Local, may turn on an item of the Grant attribute -
Program, Tune, Alarm or Local.
Uninitialized
Setting:
Program / Tune / Alarm / Local
Deny R/W The Denied attribute is provided for use by a monitoring
application in an interface device and may not be changed by
an operator.
Uninitialized
Setting:
Program denied / Tune denied / Alarm denied / Local denied
IN_1 IN_1 IN_1 IN_1
Input 1 Input 1 Input 1 Input 1
R/W Input 1 of the Integrator Block. -
Status Status of IN_1
Value Actual value
IN_2 IN_2 IN_2 IN_2
Input 2 Input 2 Input 2 Input 2
R/W Input 2 of the Integrator Block. -
Status Status of IN_2
Value Actual value
OUT_PTRIP OUT_PTRIP OUT_PTRIP OUT_PTRIP
Output Pre Trip Output Pre Trip Output Pre Trip Output Pre Trip
R/W The second discrete output. -
Status R/W Setting:
Good Non Cascade / Good Cascade / Uncertain / Bad Not
Connected / Bad
Bad Not Connected
Value R/W Setting:
0: Off / 1: On
0
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value