KROHNE OPTISWIRL 4070 EN - Manual (Page 41)

START-UP
5
41
OPTISWIRL 4070
www.krohne.com 02/2013 - 4000150606 MA OPTISWIRL4070C R07 en
Start-up
5.1 Start
After the device is switched on, the display shows the following in sequence
1. Testing...
2. Device type
Sofware Version - Revision
The device performs a self-test and switches to measurement mode. Here, all of the parameters
preset for the customer are analysed and checked for plausibility, and the current measured
value is displayed.
5.2 Start-up and control
INFORMATION!
The flowmeter is largely maintenance-free.
Observe the application limits in respect of temperature and medium. Additional information
refer to Technical data on page 70.
MA_OPTISWIRL4070C_R07_en_150606_PRT.book Page 41 Wednesday, February 13, 2013 2:47 PM