KROHNE MAC 100 EN - Manual (Page 61)

OPERATION
6
61
OPTISENS MAC 100
www.krohne.com 04/2011 - MA OPTISENS MAC 100 R01 en
6.6.3 Status log and calibration log
The calibration log (B5.1) contains the results of the latest calibrations. Also within this log you
can move up or down with the help of ↑ or ↓ and you can exit it with ^.
The status log (B5.2) contains the latest changes of the device status. Within the log you can
move up or down with the help of ↑ or ↓, you can exit the log with ^. There are two type of status
messages:
• Checked boxes: they have a hook in a square to the right of them and stand for emerging
events (e.g. current loop open).
• Unchecked boxes: they have a square without a hook to the right of them and stand for
leaving events (e.g. if an application error is not longer available).
Figure 6-5: Example for calibration log
Figure 6-6: Example for status log
.book Page 61 Friday, April 1, 2011 4:59 PM