KROHNE BM 102 HART - Manual (Page 3)

BM102 Remote Operation - HC 275 / AMS
Dev.-Rev. EC, DD-Rev. 01
© 2000 KROHNE SA 26103 Romans (France) Page 3
1 General Information
The BM102 is a two-wire transmitter with 4..20mA current output and HART

capability.
General characteristics of the BM102 HART

interface:
•
Multidrop Mode is supported.
•
Burst Mode is not supported.
•
The digital process value which is modulated on to the analog output signal as well as the
analog value itself are low-pass filtered.
Electrical connection (point-to-point or multidrop): refer to sections HART

Communication and
Electrical connection of the „Installation and Operating Instructions Manual. MicroFlex BM102“.
2 HART® Transmitter Revisions and Instrument Firmware
2.1 Device Revision
The BM102 HART® transmitter has only one revision: Device revision 1.
2.2 DD Revision
MicroFlex BM102 has the DD revision 1.
• It is capable to work both with AMS (1.4, 1.4.1, 5.0) and HC275.