Technical data, 3 measuring accuracy – KROHNE OPTIFLUX 5000 Sandwich EN User Manual
Page 29
Advertising
TECHNICAL DATA
6
29
OPTIFLUX 5000
www.krohne.com
10/2011 - 4000686202 - MA OPTIFLUX 5000 SW R02 en
6.3 Measuring accuracy
Each flowmeter is standard wet calibrated under reference conditions by direct volume
comparison before leaving the factory.
Reference conditions
• Medium: water
• Temperature: 20°C / 68°F
• Pressure: 1 bar / 14.5 psi
In combination with the IFC 300
In combination with the IFC 100
Figure 6-1:
X
XX
X [m/s]: flow velocity
Y
YY
Y[%]: deviation from the actual measured value (mv)
Accuracy
Curve
DN2.5...6 / 1/10...1/4"
0.3% of mv + 2 mm/s
3
DN10...100 / 3/8... 4"
0.15% of mv + 1 mm/s
1
Accuracy
Curve
DN2.5...6 / 1/10...1/4"
0.4% of mv + 1 mm/s
As 2 + 0.1%
DN10...100 / 3/8...4"
0.3% of mv + 1 mm/s
2
.book Page 29 Monday, October 3, 2011 1:46 PM
Advertising