KROHNE GA 24 EN - Manual (Page 14)

4
ELECTRICAL CONNECTIONS
14
GA24
www.krohne.com 02/2011 - 4001229901 MA GA24 R01 en
4.3 Limit switch settings
4.3.1 Limit switch settings MS14
• Undo bracket screw 1 and set switching position
• Secure bracket screw 1
The distance between the limit switch and the casing is factory set with clamp screw 2 so that
the limit switch touches the glass taper at the maximum switching point.
The limit switch must be rotated 180° to reach the lower range of the scale.
4.3.2 Limit switch settings TG21
• Undo bracket screw 1 and set switching position
• Secure bracket screw 1
The distance between the limit switch and the casing is factory set at approx. 1 mm (0.039") with
the clamping screw 2.
MA_GA24_R01_en_4001229901_PRT.book Page 14 Wednesday, February 2, 2011 8:57 AM