KROHNE OPTIBATCH 4011 C EN - Manual (Page 21)

START-UP
5
21
OPTIBATCH 4011 C
www.krohne.com 01/2012 - 4000868402 - MA OPTIBATCH R02 en
5.1.1 Manual connection
• Press <F3> or select Connection > Auto Connect.
i The Connect dialogue box will open.
• Select the Port you wish to connect through. The default values for: Baud Rate, Parity, Stop
Bits and Slave ID are shown.
• Select OK or Cancel
i Toolbox will connect to the meter.
1 Connection Port
2 Baud Rate
3 Parity
4 Stop Bits
5 Slave ID
6 Cancel button
7 OK button
MA_OPTIBATCH_en_120302_4000868402_R02.book Page 21 Thursday, August 2, 2012 3:17 PM