KROHNE OPTIBATCH 4011 C EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTIBATCH 4011 C
www.krohne.com 01/2012 - 4000868402 - MA OPTIBATCH R02 en
Safety instructions
1.1 Intended use
This flowmeter has been specifically designed for the fast batching measurement of mass or
volume and is intended for use in filling machines or bespoke applications.
1.2 CE certification
This device conforms with the following EC directives:
• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
• Pressure Equipment Directive 97/23/EC
The manufacturer declares conformity and the device carries the CE mark.
1.3 Associated documents
This handbook should be read in conjunction with relevant documents in relation to:
• hazardous areas
• communications
• concentration
• corrosion
CE marking
MA_OPTIBATCH_en_120302_4000868402_R02.book Page 5 Thursday, August 2, 2012 3:17 PM