KROHNE OPTIMASS 3000 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTIMASS 3000
www.krohne.com 03/2012 - 4001593001 - MA OPTIMASS 3000 R01 en
Safety instructions
1.1 Software History
1.2 Intended use
This mass flowmeter is designed for the direct measurement of mass flow rate, product density
and product temperature. Indirectly, it also enables the measurement of parameters like total
mass, concentration of dissolved substances and the volume flow. For use in hazardous areas,
special codes and regulations are also applicable and these are specified in a separate
documentation.
1.3 CE certification
This device conforms with the following EC directives:
• EMC Directive 2004/108/EC
• ATEX Directive 94/9/EC
• Low Voltage Directive 2006/95/EC
• Pressure Equipment Directive 97/23/EC
The manufacturer declares conformity and the device carries the CE mark.
Release date Software version Documentation
Aug 2008 V2.2.xx MA MFC 300 R02
MA OPTIMASS 3000 R01
CE marking
MA_OPTIMASS_3000_en_120315_4001593001_R01.book Page 5 Tuesday, October 23, 2012 10:14 AM