KROHNE BM 26 A EN - Manual (Page 28)

28 Installation and Operating Instructions BM 26 A
Clamping in position on measuring tube
MS 15 /STD/…/PC/…/BT or MS 15/EXI/…/PC/…/BT
1 Limit switch clamp
2 Limit switch bracket
3 Measuring scale
clamp
4 Measuring tube
5 2 M4 screws (for
bracket)
6 Switching point
centerline
Fine adjustment:
See procedure,
section 3.6
7 MS 15 /STD or /EXI
limit switch cover
MS 15/STD/…/AL/…/HT, MS 15/EXD/…/AL/…/HT, or MS 15/EXI/…/AL/…/HT
1 1 x locking screws M6
-use 3 mm Allen key
2 Limit switch
bracket
3 Limit switch clamp
4 Measuring tube
5 Measuring scale
clamp
6 Switching point
centerline
Fine adjustment:
See procedure,
section 3.6
7 Cover lock:
M3 screw -
use 2mm Allen key
8 MS15 EXD
limit switch cover
9 Cable fitting (not
supplied by KROHNE)