KROHNE CORIMASS E Series EN - Manual (Page 28)

28
4.8 Connection diagram of compact version
The connection converter - transducer of the compact version will be carried out by the
manufacturer. A reconnection is only required in the case of a defective cable between
terminals and electronics module. You can see the connection of the converter cable in the
terminal box at Figure 32.
Note:
MFM 2081 K
Black to 34 for Standard and EEx ib II B
Black to 35 for EEx ib II C
MFM 3081 K
Black to 34 for Standard
Black to 35 for EEx ib II C
Fig. 32: Connection compact version