KROHNE BM 102 EN - Manual (Page 21)

BM 102 21
3.3.2 HART
® Communicator
Display and configuration can also be carried out via a HART
® communicator. Operator control via
this unit is described in detail in the operating instructions supplied with the HHC.
Basic operating instructions for taking measurements
Communicator layout
1
Two-pin jack for loop connectors
2 LCD
3
Function keys (F1 … F4)
4 Action keys
On/off UP
Arrow
n/a
LEFT
Arrow
DOWN
Arrow
RIGHT
Arrow
Other functions:-
LEFT Arrow: Previous menu key
RIGHT Arrow: Select key
Displaying readings
Use the UP and DOWN arrows to move to the correct line and then select with the RIGHT Arrow.
1
HART Communicator
1
Offline
2 → Online
3 Frequency Device
4 Utility
2 BM102:00000 01
Online
1 → <Process Var.>
2 <Config./Test>
3 <Access/Rights>
4 <Watch status>
5 <HART Variables>
SAVE
F1 F2 F3 F4 F1 F2 F3 F4
Main menu Online menu
3
BM102:00000 01
<Process Var.>
1 → <Measurements>
2
<Input/Outputs>
4 BM102:00000 01 ♥
<Measurements>
1 → <Lvl> 878.00 mm
2 <Dist> 121.00 mm
SAVE HOME HELP SAVE HOME
F1 F2 F3 F4 F1 F2 F3 F4
Measurement & input and output functions menu Measurement display function