KROHNE OPTIWAVE 7300C FOUNDATION FIELDBUS - Manual (Page 4)

2
FOUNDATION FIELDBUS DATA
4
OPTIWAVE 7300 C
www.krohne.com 02/2010 - 4000621601 - AD FF OPTIWAVE 7300 R01 en
INFORMATION!
• The data that follows is applicable only for fieldbus communication networks. For general
data, refer to the handbook.
• Additional information (certificates, special tools, software, files...) and complete product
documentation is on the CD delivered with the device or can be downloaded free of charge
from the website (Downloadcenter).
Description
Type FMCW radar level transmitter
Output signal Digital signal that agrees with the FF communication protocol
Test status Registered
Data blocks
Registered features Alarms, events, function blocks, linking and trending
Registered function blocks 1 x Resource Block (RB)
4 x Analog Input Blocks (RB)
Other blocks 1 x Transducer Block (TB)
Communication Standard Foundation Fieldbus protocol that agrees with IEC 61158-2
ITK version 5.1
Physical layer
Protocol Foundation Fieldbus protocol that agrees with IEC 61158-2, galvanically isolated
Physical layer types Standard power signaling, bus powered, non I.S.
Other features Bus interface with integrated reverse polarity protection
Electrical connections
Device power supply (24 V input) 18...30 VDC
Current consumption on
FOUNDATION Fieldbus network
20 mA
Input and output
Output data Level, distance, level conversion, level mass, reflection, ullage conversion or
distance mass
Input data None
Error current FDE Typically 0 mA (FDE =Fault Disconnection Electronic)
Link Master function Not supported