KYORITSU 3007A User Manual
Page 23
10. CLEANING OF THE INSTRUMENT
●
When cleaning the instrument, wipe it with a silicon cloth or soft cloth to
remove dust or dirt.
●
When it is hard to remove the dirt, wipe it with a cloth wet with water and
dry the instrument completely after cleaning.
CAUTION
Never use any solvent which may transmute plastics, for example, organic
solvent such as benzene, acetone, etc.
11. SERVICING
If this tester should fail to operate correctly, return it to your nearest
distributors stating the exact nature of the fault.
Before returning the instrument, make sure that:
a) Operating instructions have been followed.
b) Leads have been inspected.
c) Fuse has been checked.
d) Battery has been checked.
e) The unit is returned with all accessory leads.
Remember, the more information written about the fault, the quicker it will be
serviced.
―
21
―
9. CASE AND STRAP BELT ASSEMBLY
By hanging the instrument around the neck, both hands can be used freely
for easy and safety working.
Pass the strap belt down through
the side panel of the main body
from the top, and up through the
slots of the probe case from the
bottom.
Pass the strap through the buckle,
adjust the strap for length and
secure.
―
20
―
3007A-E 01.9.12 11:52 AM ページ 20