KYORITSU 6310 Quick Manual - Manual (Page 22)

KEW6310 Demand measurement
Header of the saved data
INTVL_WP+[Wh]_1
︸ ︸ ︸ ︸
① ② ③ ④
* ②,③,④ will be blank if ① is DEM or TARGET.
Saving of demand values
１
Press Start → Next → Next → Complete
to start recording after checking the
settings.
Press the Start Button at least 2 sec to start recording immediately.
Star
t
≪ Manual≫ ≪ Timer≫
File name for saving data is displayed.
▼
Data saving starts.
▼
appears and flashes.
Status indicator LED flashes.
▼
Stand-by until preset time comes.
▼
２ Preset start time comes.
Saving
▼
Status indicator LED is ON.
flashes and or is displayed.
(flashes in red according to the preset interval)
No setting change can be made during data saving.
３ ▼
Press Stop .
▼
Preset termination time comes.
Stop ▼
File name for saving data is displayed.
Status indicator LED goes off.
and or goes off.
KEW6310 − 20 −
① INTEG ： Integration value
INTVL ： Variation in interval
DEM ： Sum of demand value
TARGET ： Target value
②
WP+ ： Active power energy (consumption)
WP- ： Active power energy (regenerating)
WS+ ： Apparent power energy (consumption)
WS- ： Apparent power energy (regenerating)
WQi+ ： Reactive power energy
(consumption) : lagging
WQc+ ： Reactive power energy
(consumption) : leading
WQi- ： Reactive power energy
(regenerating): lagging
WQc- ： Reactive power energy
(regenerating): leading
③ Unit
④ System