KYORITSU 6310 Quick Manual - Manual (Page 26)

KEW6310 WAVE Range
Header of the saved data
File ID : 6310-04 (Waveform data)
5/133
︸ ︸
① ②
File ID : 6310-05 (Vector data)
INST_A1[deg]
︸ ︸ ︸ ︸
① ② ③ ④
* when [deg] is displayed at space ④, it means phase angle
Saving at WAVE Range
１
Press Start → Next → Next → Complete
to start recording after checking the
settings.
Press the Start Button at least 2 sec to start recording immediately.
Star
t
≪ Manual≫ ≪ Timer≫
File name for saving data is displayed
▼
Data saving starts.
▼
appears and flashes.
Status indicator LED flashes.
▼
Stand-by until preset time comes.
▼
２ Preset start time comes.
Saving
▼
Status indicator LED is ON.
flashes and or is displayed.
(flashes in red according to the preset interval)
No setting change can be made during data saving.
３ ▼
Press Stop .
▼
Preset termination time comes.
Stop
▼
File name for saving data is displayed.
Status indicator LED goes off.
and or goes off.
KEW6310 − 24 −
① 1 ∼ 128 ： Sampling sequence
② 129 ∼ 256 ： ditto (① + 128)
① INST
： Instantaneous value
AVG ： Average value
MAX ： Max value
MIN ： Min value
②
V ： Voltage per phase
A ： Current per phase
③ CH No. ： 1 ∼ 4
④ Unit