Martel Electronics BetaGauge 321A-Ex - Manual (Page 20)

8. Press the “NEXT” option to view when the switch closed, and the dead band.
9. Press the “NEW TEST” option to clear the data and perform another test.
10. Press the “DONE” option to end the test and return to the standard pressure setting.
Example: [P1] ST will return to [P1].
Important NOTE: The previous example uses a normally closed switch. The basic
procedure is still the same for a normally open switch, the display will just read “OPEN”
instead of “CLOSE”.
7. Calibrating Transmitters
Warning
Check entity parameters before making any connections to this device.
18