Martel Electronics BetaGauge 321A-Ex - Manual (Page 9)

CURRENT DISPLAY
P[1] P[2] P[1] P[2] mA RTD
ST ST
P[1]
P[2]
P[1]ST X X X
P[2]ST X X X
mA X X
RTD
OTHER DISPLA
YS
7
P[2] ST = Switch Test with right side sensor.
mA = Milliamps measure
RTD = RTD Temperature Measurement (if a probe is connected).
The following table shows which functions are available concurrently.
An X in a column indicates that the mode in the current display will not be available for
selection if the mode in that row is in use in any other active display.
Table 4 Mode Concurrency
Note: P2 is only available on the model 321A-Ex.
2.1.1.3 Accessing Other Menus
Use the MORE option on the Main Menu to access the other menu functions.