Martel Electronics 320 User Manual
Page 27
identifying
information
into
the
calibrator’s
nonvolatile memory. The owner’s name cannot be
changed unless the operator knows the unit's access
code.
The access code is unique to each calibrator and is
printed on the individual calibration sheet that is
shipped with each calibrator.
When a new calibrator is received, the owner should
enter the desired owner name and file the access code
in a safe place for future reference. DO NOT keep the
access code with the calibrator.
When the owner setup is selected, the operator is
prompted to enter the access code. Enter the access
code from the calibration sheet and press Enter. If the
correct code is entered, the next display will be the
current owner name on the top line.
The name of the owner can be any alphanumeric
combination of characters up to a maximum of 16.
The characters are assigned by entering the decimal
25
YOUR NAME HERE