Martel Electronics 320 - Manual (Page 35)

next calibration step.. Repeat this process for all
points to be calibrated.
At the end of the pressure calibration sequence you
will be prompted for the current date. The format is
MMDDYY. CALIBRATION DATA IS NOT
SAVED UNTIL A DATE IS ENTERED.
7 = Trip (Trip Detect)
The trip detect setup function allows trip detect to be
turned on or off:
The operation of the trip detect function is explained
on page 15 and 16 under the Trip Rst key.
33
trip detect
1 = on 2 = off