Revo RECDH2812-1 - Manual (Page 11)

7
The screen color can be adjusted by using the WHITE BALANCE function.
1) AWB Wide range auto white balance mode.
2) AWC -> SET Please press the ENTER button while the camera is directed
at a piece of while paper to obtain the optimum state under
current illumination. if the environment including the light source
is changed, you have to adjust the while balance again.
3) MANUAL Manual mode. User can change R and B Gain manually.
O 4) INDOOR Set the color temperature to 3200 K
O 5) OUTDOOR Set the color temperature to 6300 K
O O 6) ATW Set the color temperature 2500 K to 9500 K
WHITE BAL
The DAY/NIGHT menu is used to configure the day and night related setting for this camera.
This camera can turn the IR(infrared)filter on or off.
Mode : AUTO / EXT / B/W / COLOR
DAY NIGHT
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
DAY NIGHT AUTO
DELAY
IIIIIIIIIIIIIIIIII
5
S-LEVEL
IIIIIIIIIIIIIIIIII
50
E-LEVEL
IIIIIIIIIIIIIIIIII
30
RETURN RET
►
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT B/W
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
DAY NIGHT B/W
BURST OFF
RETURN RET
►
<DAY/NIGHT AUTO MODE>
<DAY/NIGHT B/W MODE>
1. LENS DC
2. EXPOSURE
3. WHITE BAL MANUAL
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
<WHITE BAL MANUAL MODE>
WHITE BAL MANUAL
BLUE
IIIIIIIIIIIIIIIIII
50
RED
IIIIIIIIIIIIIIIIII
50
RETURN RET
►
You can configure the DNR(Digital Noise Reduction) related settings. if you press the Setup
switch when ON is selected in 3DNR, the corresponding screen appears.
3DNR (Digital Noise Reduction)