Revo RECDH2812-1 - Manual (Page 8)

4
3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping screws are
supplied only use if they are suitable. Turn the housing to right direction about 16 degrees
to lock in place.
4. The assembly of the dome body and liner is in reverse order of disassembly.
Finally, lock dome body with locking screw(M3X5) from the accessory kit.
OPERATING CAMERA
Enter Button
Up
Down
Left
Right
Spot Video Out
1
2
3
4
5
6
1
2 3 4 5
6
The housing can also be mounted
on a 4s electrical box.
MOUNTING HOUSING TO
AN ELECTRICAL BACK BOX
Electrical box
Torx screws
UNC 8-32 x 0.75
Rubber
Washers(4x)